DataCard SD Series Guia do Utilizador descarregar pdf (Página 42)

32 System Maintenance

F. Insert cleaning carddisplaysontheLCDpanel.PresstheUSERbuttonto

startthecleaningcycle.

Theprintermovesthecardthroughtheprinterseveraltimesandejectsit

intheoutputhopper.

3. Removetheusedcleaningcard.Waitafewminutesfortherollerstodry.

4. Preparetheprinterforuse.

A. Replacethecardsintheinputhopper.

B. Installanewcleaningsleeveontheribboncartridgeandremovethe

protectivecover.Referto“LoadtheCleaningSleeve”onpag e 20forthe

stepstofollow.

C. Replacetheribboncartridgeandclosetheprintercover.

PresstheUserbuttontoreturntheprintertoReady.Theprinteris

availabletoprintcardsagain.

D. Discardtheusedcleaning cardandcleaningsleeve.

HINTS&TIPS

• Usethecleaningcardandcleaningsleeveonetimeonly.

• Changethecleaningsleeveeachtimeyoucleantheprinterorchangethe

printribbon.

Ifthecardlightisblinkingamberandtherearecardsintheinputhopper,it

indicatesthattheprinter’sconfiguredcleaningcounthasbeenreachedandit

istimetocleantheprinter.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 77 78

Sem comentários

DataCard SD Series Guia do Utilizador Página 42