DataCard RP90 Plus Manual de Instalação descarregar pdf (Página 25)

22 Installing the Printer Driver

9. Use the printer LCD panel to set IPSec Type to Preshared Key.

10. Install the printer using a USB connection and install the Status Monitor. See “Install

using a USB connection” on page 9 and “Installing the Status Monitor” on

page 30 for the steps to follow.

11. Open the Status Monitor as an administrator. See the Open the Status Monitor section

in the User Guide.

12. Click the Printer Select tab. It shows the Security settings chosen on the printer in

steps 8 and 9 above. Do the following:

A. Click Details. The IPSec Setting dialog box opens.

B. Choose Preshared Key from the Download Type list.

C. Click Select. The Select Certificate Download File dialog box opens.

D. Browse to the location of the key file from step 1.

E. Select the file and then click Write. The Status Monitor sends the file to

the printer.

13. Remove the USB cable connecting the printer and PC.

14. Install the printer using a LAN connection See “Install using a Network connection”

on page 22.

Install using a Network connection

If your network administrator will assign the network address to the printer, obtain the network

address before beginning this procedure.

1. Install printer supplies and power on the printer. See Using the Printer in the User

Guide to install supplies and power on the printer.

2. Connect the Ethernet able to the network and to the printer. See “Connecting the

Data Cable” on page 8 for the steps to follow.

3. Set Network > Host Interface to LAN, as described in the Printer LCD Panel section

of the User Guide.

4. If you will use DHCP addressing, choose On for Network > DHCP, as described in the

Printer LCD Panel section of the User Guide.

5. If you are using static addressing, set Network > DHCP to Off. Set the IP address

using the LCD panel, as described in “Setting Network Address Values” on

page 18.

6. After saving settings, power the printer off, wait a minute, and then power the printer

on.

7. If you set DHCP to On, view the network address, as described in the Printer LCD

Panel section of the User Guide.

8. Start the Windows

XP, Windows 2000 or Windows Vista

operating system and log

in as a user with Administrator permissions.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Sem comentários

DataCard RP90 Plus Manual de Instalação Página 25