DataCard ImageCard Select Guia do Utilizador descarregar pdf (Página 20)

2-4 Using the printer

User’s Guide for Select™ Platinum Series™ Printers

For magnetic stripe cards, the magnetic stripe faces down and is positioned

toward the side of the printer that opens (see Figure 2-3). (For some custom

applications, you might receive instructions to place cards in a different

orientation.)

For smart cards, position the card so the chip is up and toward the open end of

the card cartridge.

Figure 2-3: Load cards into the card cartridge

Do not run the printer for an extended time without cards in the card cartridge.

Load more cards as soon as you are prompted.

4 Replace the card cartridge in the cavity (step 1 in Figure 2-4). Push the bottom of

the card cartridge toward the printer until it clicks into place (step 2 in Figure 2-4).

Figure 2-4: Replacing the card cartridge

If the printer has a locking card cartridge, lock the cartridge after replacing it.

♦

Magnetic Stripe

Smart Card Chip

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 154 155

Sem comentários

DataCard ImageCard Select Guia do Utilizador Página 20