DataCard SR300 Manual do Utilizador descarregar pdf (Página 43)

SR200 & SR300 Printer SDK Guide

Page 39

Network Data (Page Code=0x2D)

Bit

Byte

7 6 5 4 3 2 1 0

0 0 Page Code (0x2d)

Page Specific Parameter Length (0x4e)

2 to 5

(MSB) IP Address (Binary)

(LSB)

6 to 9

(MSB) Subnet Mask (Binary)

(LSB)

10 to 13

(MSB) Default Gateway (Binary)

(LSB)

Session Timeout

DHCP

Host I/F

17 to 26

Printer Name (ASCII Characters)

IPSec Mode

Reserved

IPv6 Subnet Prefix Length (IPv6)

IPv6 Address Configuration

31 to 46

(MSB)

IPv6 Default Gateway Address

(LSB)

47 to 62

(MSB)

IPv6 Address

(LSB)

63 to 79

Reserved

Tips for Success

♦ These settings are saved to printer EEPROM (memory).

♦ If you set a value to 0xff, the current setting in the printer is used.

♦ The Session Timeout and Printer Name settings become effective after they

are set.

♦ The DHCP and Host I/F settings become effective after the printer is powered

off and powered on.

Session Timeout The time interval to detect that the printer TCP session has

been disconnected from the host PC. For best results, use 0.

0 Disabled 1 10 minutes

2 20 minutes 3 30 minutes

4 60 minutes

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Comentários a estes Manuais

Sem comentários

DataCard SR300 Manual do Utilizador Página 43

Comentários a estes Manuais

Manuais e produtos relacionados com Laminadoras DataCard SR300