DataCard RL90 Guia do Utilizador descarregar pdf (Página 22)

Prepare to print cards

16 RP90 and RL90 User Guide

Prepare to print cards

Set the ink ribbon type

1 Press the MENU key until "Ink"

is displayed.

2 Press the ENTER key.

3 Use the up and down arrow

keys to select the type of ink

ribbon you are using –YMCK

or YMCKK. (YMCK+PO is not

available at this time.)

4 Press the ENTER key after

selecting the ink ribbon type.

5 Press EXIT twice to return to

the "Ready" display.

Initialize the ink ribbon

1 Press the RESET key on the

control panel.

2 The LCD display reads

"Initialize OK?"

3 Use the up and down arrow

keys to select "2'nd Panel,

OK?" or "Next Panel, OK?"

— Press the ENTER key

when "Initialize OK?" is

displayed to initialize the

printer without winding the

ribbon.

— Press the ENTER key

when "2'nd panel, OK" is

displayed and the printer

winds the print ribbon two

panels.

— Press the ENTER key

when "Next Panel, OK?" is

displayed and the printer

winds the ribbon one panel.

Tips – Ink ribbon

• To avoid dirt and dust

particles that may have

adhered to the ink ribbon

during loading, initialize the

ink ribbon one or two

panels each time the ink

cartridge is removed from

the printer.

Tips – Ink ribbon

• Reset the ink ribbon type

when you set up the first

time and if you change the

type of ink ribbon.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 74 75

Comentários a estes Manuais

Sem comentários

DataCard RL90 Guia do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Impressora multifunções DataCard RL90