DataCard RL90 Guia do Utilizador descarregar pdf (Página 56)

Laminator error recovery

50 RP90 and RL90 User Guide

Laminator error recovery

The laminator’s LCD panel displays the type of error that has happened.

Card jam

The laminator’s LCD panel displays

the location of the card jam: Card

Jam (In), Card Jam (Middle), or Card

Jam (Out). Use the following steps to

remove card jams.

1 Open the laminator door by

pulling the top of the door

toward you.

2 Turn the take-up knob

clockwise to remove slack in

the laminator material.

3 Press the laminator cartridge

eject button and remove the

laminator cartridge. The

cartridge may be difficult to

remove; pull firmly, but do not

force. If cartridge cannot be

removed, call for service.

4 Use a coin to turn the jog dial,

which will move the card. The

jog dial can be turned

clockwise or counterclockwise

depending on the location of

the card.

5 Remove the jammed card.

The area around the heat

roller is very hot. Be careful

when removing a jammed card.

Tips – Laminator card jam

• Make sure that the card

stacker is not blocking the

card discharge slot.

• The area around the heat

roller is very hot. Be

careful when removing a

jammed card.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 74 75

Sem comentários

DataCard RL90 Guia do Utilizador Página 56