DataCard ImageCard IV Guia do Utilizador descarregar pdf (Página 60)

4-14 Loading supplies

User’s Guide for the ImageCard® IV Printer

• Replace the topcoat cartridge

If you change the type of supply material you use, see “Changing operational

settings” on page 6-15 for the complete process to follow.

Removing the topcoat cartridge

Remove the topcoat cartridge when a "Topcoat empty" message appears or when

setting up the printer.

Remove the topcoat cartridge

1 Push down on the corner of the printer's top cover to unlatch it. Lift the top cover

to the fully upright position.

When the top cover opens, the interlock switch removes power to the motors

and fans. Power is removed from the heater in the topcoat (and overlay)

station. The topcoat (and overlay) station remains HOT.

2 Move the supply tracker away from the supply roll until it stops (step 1 in

Figure 4-11).

If the supply tracker does not have a handle, it will move out of the way

automatically.

3 Pull up on the cartridge lock to release the topcoat cartridge (step 2 in

Figure 4-11).

On some cartridges, push and release the cartridge lock to release the

topcoat cartridge.

Figure 4-11: Remove the topcoat cartridge

iciv145u

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 203 204

Sem comentários

DataCard ImageCard IV Guia do Utilizador Página 60