DataCard ImageCard Select Guia do Utilizador descarregar pdf (Página 50)

4-6

Maintaining the printer

User’s Guide for Express™ and Select™ Class Printers

dClick “Pick Motor test” and then click the Start button.

e Repeat steps b through d until no dirt appears on the cloth.

f Repeat steps a through e, placing the cloth on the second pick roller (step 2 in

Figure 4-7).

g Replace the card cartridge.

6 Clean the transport area rollers:

a Open the cover and remove the print ribbon cartridge.

b Moisten an area of the lint-free cloth with citrus solvent or isopropyl alcohol.

c Place the moist area of the cloth on the first transport roller (step 1 in

Figure 4-8).

Figure 4-8: Clean rollers in the card track

dClick “Transport Motor test” and then click the Start button.

e Repeat steps b through d until no dirt appears on the cloth.

f Repeat steps b through e, placing the cloth on the second transport roller

(step 2 in Figure 4-8).

g Repeat steps b through e, placing the cloth on the double rollers (step 3 in

Figure 4-8).

h Replace the printer ribbon cartridge, close the swing arm, and close the cover.

7 If the printer has a duplex module, clean the exit roller.

a Open the duplex cover.

b Moisten an area of the lint-free cloth with citrus solvent or isopropyl alcohol.

c Place the moist area of the cloth on the exit roller (step 1 in Figure 4-8).

dClick “Transport Motor test” and then click the Start button.

e Repeat steps b and c until no dirt appears on the cloth.

f Close the duplex cover.

8 Connect the power cable to the power source and power on the printer.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 109 110

Sem comentários

DataCard ImageCard Select Guia do Utilizador Página 50