DataCard ImageCard Select Guia do Utilizador Página 65
- Página / 110
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Advanced Information
5-11
User’s Guide for Express™ and Select™ Printers
Changing the type of print ribbon
When you change the type of print ribbon you use, perform the following tasks:
•
Change the print ribbon in the printer
•
Change the Print Ribbon Type setting
•
Change the card design if needed
•
Change the printhead if needed
•
Change printhead settings through the Status Monitor
•
Print sample cards to verify the new setup
Change the print ribbon
Change the print ribbon in the printer. See “Loading the print ribbon” on page 2-7 for
information on changing the ribbon in the printer.
Change the Print Ribbon Type setting
See “Working with printer settings and data” on page 3-1 for information on changing
the print ribbon setting.
•
If you use a solid-color ribbon such as red or gold, choose Black (K) for the Print
Ribbon Type (rather than using “Always Autodetect”).
•
If you are using a scratch-off ribbon, choose Black (K) for the print ribbon type.
•
If you use any other ribbon type, the autodetect feature and the “Print on both
sides” selection will choose the correct selection.
If “Always Autodetect” is selected in the Windows 98 Properties dialog box, decide
whether to power the printer off and on to detect the new ribbon type or to change
from autodetect to selecting a ribbon type.
– If you use a YMCK or YMCKT ribbon and you want to use a panel set for each
side of the card, you can power cycle the printer and keep the “Always
Autodetect” setting.
– If you use a YMCK or YMCKT ribbon and you want to use one panel set to
print both sides of the card, you must deselect the “Always Autodetect” setting
and select the ribbon type and usage (such as “YMC (color) front; K (black)
back”) from the Ribbon Type list.
Make sure your ribbon type and card design are compatible.
Change the card design
Change the card design to use the new ribbon type or use a new card design, if
needed. Some situations where you might change the card design and ribbon type
are:
- ImageCard® and 1
- UltraGrafix® Series 1
- User’s Guide for 1
- Express™ and Select™ 1
- Class Printers 1
- Liability statement 2
- Regulatory compliance 2
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- Overview 6
- About this manual 7
- Audience 7
- Printer features 9
- Front of the printer 10
- Inside the printer 11
- Back of the printer 13
- Getting started 15
- Selecting the site 16
- Unpacking the printer 17
- Who to call for assistance 18
- Connecting the printer 18
- Loading cards 20
- Loading the print ribbon 21
- Ribbon take-up 22
- Ribbon supply 22
- Load the print ribbon 23
- Powering on the system 24
- Installing the printer driver 25
- Setup tips 28
- Make a Printer test card 29
- Printer test card 30
- Print the Windows test page 31
- Microsoft 32
- Using the printer 33
- Use the Properties dialog box 34
- Using the Status Monitor 37
- Exiting the Status Monitor 39
- Making cards 40
- Removing cards 41
- Responding to messages 42
- Shutting down the system 43
- Maintaining the printer 45
- Use the duplex cleaning card 47
- Cleaning the printer rollers 49
- Cleaning the printhead 51
- Advanced Information 55
- Using two printers 59
- Network printing 60
- Printer and PC setup 61
- Change the print ribbon 65
- Change the card design 65
- Two-step printing process 66
- Change the printhead 67
- Change printhead settings 67
- Changing operational settings 68
- • Printer values 69
- • Printing intensity 69
- Troubleshooting 70
- Problems with card appearance 71
- Obtaining service 78
- Safety and compliance 81
- Acknowledgments 83
- Supplies and cards 84
- Supply roll storage 85
- Card specifications 85
- Card size 86
- Card material 86
- New cards preferred 86
- Pre-punched cards 87
- Card quality guidelines 87
- Cleaning supplies 88
- Printer driver diskettes 89
- Anti-static wrist strap 89
- Printer components 90
- Power cord 91
- Smart card serial cable 91
- Print ribbon cartridge 92
- Card cartridge 92
- PC settings 94
- Setting port values 96
- Setting printer permissions 96
- Set printer permissions 97
- PC settings for Windows 98 99
- Magnetic stripe encoding 103
- NTT character set 104
- Select printer 105
De'Longhi ECOV310.BG manuali
Manuali dei proprietari e guide per l'utente per Caffettiera De'Longhi ECOV310.BG.
We fornisce 1 manuali pdf De'Longhi ECOV310.BG per scaricare gratuitamente in base al tipo di documento: Scheda Tecnica
Comentários a estes Manuais