DataCard ImageCard Select Guia do Utilizador descarregar pdf (Página 52)

4-8

Maintaining the printer

User’s Guide for Express™ and Select™ Class Printers

Remove the printhead cartridge

Do not touch the printing edge of the printhead cartridge. If you do, clean it, as

described in “Cleaning the printhead” on page 4-7.

1 Power off the printer.

2 Open the top cover.

3 Push down on the swing arm. The push latch will release the swing arm. Lift the

swing arm up until it is fully open.

4 Put on the ESD strap and ground it. Follow the instructions with the strap.

5 Press down on the green printhead cartridge latch to release the printhead (step 1

in Figure 4-9).

Figure 4-9: Printhead cartridge latch lever

6 Lift the printhead cartridge up and off the swing arm (step 2 in Figure 4-9).

7 Push the locking tabs to the side. Remove the printhead cable from the printhead

cartridge (see Figure 4-10).

The printhead installed in your printer might have a slightly different location

for the printhead cable receptacle.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 109 110

Sem comentários

DataCard ImageCard Select Guia do Utilizador Página 52