DataCard LM200 Guia do Utilizador descarregar pdf (Página 29)

SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide 19

Powering On

Usetheseprocedurestochecktheconnectionsandthenpowerontheprinterandlaminator.

Checking the PC Connection

TheprinterandPCareconnectedwhentheprinterisinstalled.Followinstructionsinthe

DatacardSR200&SR300CardPrintersandLM200&LM300LaminatorsInstallationGuideto

connectandsetuptheprinter.ToavoidreceivingerrormessagesontheLCDpanel,makesure

thatallsuppliesareproperly

loadedandinpositionbefor epoweringontheprinter.

Beforeyoubeginprocessingcards,makesurethat:

 Theprinterdoorandcardhopperareclosedsecurely.

 Thepowercordissecurelyconnectedtotheprinterandanappropriategroundedpower

source.

 Thecardstackerisattachedtotheprinterortothelaminator,ifused.

 Thecardsandallothersuppliesareloaded.Referto“LoadingSupplies”onpage 12for

instructions.

 TheUSBdata cableissecurelyconnectedtotheprinterandthePC,aftertheprinterdriver

hasbeeninstalled.

 Thenetworkdatacableissecurelyconnectedtotheprinterandtoanetworkport.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 137 138

Sem comentários

DataCard LM200 Guia do Utilizador Página 29