DataCard LM200 Guia do Utilizador descarregar pdf (Página 98)

88 Error Recovery and Messages

Clearing a Turnover Jam

Ifacardjamsinthecardturnoversection,Jam(TurnOver)is

displayedontheLCDpanel.Toremovethejammedcard:

1. Powerofftheprinter.

2. Removethecardhopperandcards.

3. Removetheslotcover.

4. Opentheprinterdoor.

5. Removethecleaningunit.

6. Removethejammedcardfromthe

turnoverunit,through

theslotintheinputarea.

 Ifyoucannotremoveit,gotostep 11.

 Ifyouhaveremovedthecard,continuewiththese

steps.

7. Replacethecleaningunit.

8. Placeajogdialontheturnoverunitshaft.

9. Turnthejogdialuntiltheturnoverunitishorizontalandthe

baronthedialpointstotheright.Thisisthehomepositionfor

theturnover

unit.

10. Usingthejogdialonthecleaningunit,turnittomovethecard

backintotheturnoverunit.

11. Ifthecardisstillstuck,placethesecondjogdialonthelower

cleaningunitshaft.

12. Turnboththeturnoverunitandthecleaningrollershaftsothatthe

cardstaysintheturnoverunit,andsetittothehomeposition.

13. Makesurethattheturnoverunitishorizontal(initshomeposition).

14. Returnthejogdial(s)tothehomelocation,andclosetheprinterdoor.

15. Replacecardsandthecardcover.

HomePosition

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 137 138

Sem comentários

DataCard LM200 Guia do Utilizador Página 98