DataCard LM200 Guia do Utilizador descarregar pdf (Página 58)

48 Printer and Laminator Settings

Printer Select Tab

ThePrinterSelecttabdisplays:

 CurrentPrinter.Selecttheprinterfromthedrop‐downlist,

ifmorethanoneprinterisinstalled.(UsetheLCDpanelto

settheprinter’sunitnumber.Referto“UsingtheLCD

PanelMenus”onpage 51.)

 ScanPrinterbutton.Usetolocateanotherprinterifitis

notdisplayedinthelist.TheprinterandStatusMonitor

supportIPV4whichiscommonlyused,andIPV6whichisanewerstandardthatuseslonger

addresses.Theselectionaffectswhichprintersarefoundwhenscanning:

 Ifnetwork‐connected,onlyprintersonthesamesubnetasthePCcanbefound.

 IfUSB‐connected,allprintersconnectedtothePCarefound.

 TheSyncTimebutton.UsetosendthecurrenttimeonthePCtotheprinter.

 Read‐only.DefaultLANsettings(iftheprinterissettouseanetworkconnection).These

settingscannotbechanged.IftheprinterisconnectedusingaUSBconnection,youcanuse

thistabtosettheIPaddressandothernetworkvalues.See“NetworkInstallation”inthe

InstallationGuide.

 Ifscanningdoesnotfindaprinter,youcanregisteritbyenteringtheIPaddress.Printers

withIPSecenabledmustberegisteredbeforeinformationisdisplayed.

 Ifyouneedtoassignaprinternamethatisdifferentfromanameprovidedbytheprinter,

makesurethattheprinterisinstalledwithaUSBconnection,andthenenterthenew

printername.ThenamecanincludeonlyASCIIalphabeticornumericcharacters,(other

charactersarenotdisplayed

attheprinter).Yournetworkadministratorcanprovide

informationaboutallowedorrequirednamesonyournetwork.

 Securitysettings.ThesecanbesetonlywhentheprinterisconnectedusingaUSB

connection.ClicktheDetailsbuttontoopentheIPSecSettingdialogbox.Refertothe

InstallationGuideforthestepstofollow.

IfmorethanoneSR ‐CPprinterisinstalled,youcan

changetheprinterforwhichinformationis

displayedbyselectingitfromtheCurrentPrinter

list.TheStatusMonitorcommunicateswiththe

selectedprintertoupdateinformation.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 137 138

Sem comentários

DataCard LM200 Guia do Utilizador Página 58