DataCard LM200 Guia do Utilizador descarregar pdf (Página 82)

72 Maintaining Your Printer and Laminator

Cleaning the Printer

Thissectionprovidesinformationregardingpropercareandcleaningoftheprinter.Italso

includesrecommendationsabouthowoftentocleanandreplacecomponents.

RecommendedcleaningsuppliesarelistedinChapter 7:"Supplies”inthisUser’sGuide.

Cleaning the Cleaning Unit

Thecleaningunitislocatedinsidetheprinterdoor.Itcleanslint

andotherdebrisfromthecardsbefor eprinting.Tocleanthe

unit:

1. Opentheprinterdoor.

2. Pullthecleaningunitout.

3. Washthebluecleaningrollerswithwater.Rubrollers

gentlyunderrunningwater.Donotuseisopropanolor



detergentstocleantherollers.

4. Allowthecardcleaningrollerstodrythoroughly.

5. Reinstallthecleaningunitwiththebluerollersfacingtothe

right.

6. Closetheprinterdoor.

Cleaning the Card Load Roller

Thecardloadrollerislocatedunderthecardhopperand

pickscardsbeforetheyareprinted.

1. Removethecardhopper.Referto“Removingthe

CardHopperandCards”onpage 13.

2. Usingacleaningwipewithisopropanol,wipethe

rollerwhilepushingittowardtheprinter.

3. Replacethecardhopper.

Referto“Replacingthe

CardHopper”onpage 14.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 137 138

Sem comentários

DataCard LM200 Guia do Utilizador Página 82