DataCard UltraGrafix Select Manual de Instalação descarregar pdf (Página 120)

108 Card Setup

Scale Select the check box, and then click Modify to scale the

image.

You can manually insert Height and Width values based on

the physical size or percentage of the size of the barcode.

Click the Proportional by Width/Height check boxes to have

the image adjust proportionally based on the Height or Width

value you enter.

Click the icon to select Data Field information for this

operation.

Element Group Element Groups allow you to split graphic/text/Barcode

element operations between multiple devices. This is done to

improve throughput.

Preceding

Operations

Click Add/Modify to open the dialog from which you can

select the operation(s) to occur before this operation. Use the

arrows to move the operations from one column to the other.

Vision Verification Tab Properties

Use Printing Offset Select the Card Stock Setup to use the printing offset defined

therein. This will ensure that images are centered within the

area as defined in the pattern match.

Overrides Tab Properties

Check Digit (Optional) A check digit that the reader can use to verify that

the Barcode is valid

Bar Height The height of the Barcode

Narrow Bar Width The width of the narrow bars (in pixels)

Narrow To Wide

Ratio

The size ratio of the narrow bars to the wide bars (between

2:1 to 3:1)

Quiet Zone Allows whitespace to be added around the Barcode

(generally on busy backgrounds) to help prevent read errors.

Human Readable

Text

Check box to override. Adds a line of numerical characters

beneath the Barcode. Click Fonts to select the font style to

use.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 321 322

Sem comentários

DataCard UltraGrafix Select Manual de Instalação Página 120