DataCard UltraGrafix Select Manual de Instalação descarregar pdf (Página 255)

Maxsys and MX Series Software Administrator’s Guide 243

Appendix C: Artista VHD

Module

This appendix explains how to create the setups necessary for

printing with an Artista

VHD module on an MX6000 card

personalization system.

Setups can be created on an MX6000 Simulator and then copied to

the production card personalization system.

Introduction

The Artista VHD module prints separate layers of cyan, magenta, yellow, black,

and optionally a spot color on transparent retransfer material, and then transfers

the composite image to the card using heat and an adhesive. Images are printed

with pigment-based inks, not conventional dyes.

Ribbons must be installed in the following order:

• Cyan, magenta, and yellow in that order

• Black can be the fourth ribbon

• A spot color ribbon must follow black (if black is present) or yellow

The Artista VHD module prints at 600 dots per inch. An optional 1200 dots per

inch printhead can be used only in the fifth printhead position.

Requirements for graphics files used with the Artista VHD module are given in

the Data Formatting Guide.

Ribbon Stock Setup

You must create a Ribbon Stock Setup for your printing jobs. Follow these steps:

1. From the menu bar, select Applications | Stocks | Stock Management.

2. Under Stock Types (in the left pane), select Retransfer Stock Set.

3. Click New. The Retransfer Stock Set dialog box opens.

4. On the Ribbon Stock tab, enter a description. For this example, use

“CMYK+K+Gold+Blanking”.

5. Click in the box for each print station (Mount Point) you will use, and select

the Stock Name of the type of ribbon that will be mounted in that print

station.

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 321 322

Sem comentários

DataCard UltraGrafix Select Manual de Instalação Página 255