DataCard UltraGrafix Select Manual de Instalação descarregar pdf (Página 209)

Maxsys and MX Series Software Administrator’s Guide 197

Testing a Key Reader

When testing Datacard key readers, the test function checks for a TCP/IP

connection and then sends one test transaction to verify that the reader is

responsive. For PC/SC readers the test is checking for connectivity. To test a key

reader, complete the following steps.

1. Select Ap

plications | Smart Card Management | Key Reader Management

from the menu bar.

2. Select the key read

er to test.

3. Click Test from the toolbar.

4. Cl

ick OK. If the test fails, verify that you have entered the correct IP address

for a TCP/IP reader or that you have entered the correct host name for a PC/

SC reader, and then re-test the reader.

Local Master Key (LMK) Management

Local Master Key (LMK) Management enables the user to create entries for

multiple local master keys and to use aliases (custom names) to identify the keys.

An LMK is required by each cryptographic device used to encrypt and decrypt

other keys used in the smart card personalization process. LMKs are identified by

the aliases created for them and by the encrypted key check values used to create

them. Use Local Master Key Management to define LMK aliases. Aliases are used

in the Card Setup to “map” the logical crypto device name (e.g. HSM1) to an

actual device.

Adding Local Master Key Aliases

To add a local master key alias, complete the following steps.

1. Select Applications | Smart Card Management | Local Master Key

Management from the menu bar. Click New.

2. For Name, enter a name for the LMK.

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 321 322

Sem comentários

DataCard UltraGrafix Select Manual de Instalação Página 209