DataCard UltraGrafix Select Manual de Instalação descarregar pdf (Página 199)

Maxsys and MX Series Software Administrator’s Guide 187

3. For name, enter a name for the crypto device.

4. F

or Description, enter a comment that describes the crypto device.

5. Verify that the Available check box is selected to make the crypto device

available for use by personalization applications.

6. F

or Address, enter the IP Address and Port Number of the crypto device.

7. F

or Crypto Type, select the crypto device model number.

8. For

Firmware Indicator, enter the version of firmware you are using.

9. For Default Command, enter a command. A value for the default command

may have been provided. Change it as needed for the crypto device you are

using. The default command is sent to the crypto device only when the Test

button is selected (from the Crypto Device Management application's main

screen).

10. Under Function,

enter the names of the functions supported by the device in

the Name field, and then click Add. Examples are P3, Affina, etc.

11. Cl

ick the Auto-Fetch button. If the crypto device is functioning, the Firmware

Indicator and Check Value fields should be populated with values. Ensure

that the values are the ones you expect for this device.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 321 322

Sem comentários

DataCard UltraGrafix Select Manual de Instalação Página 199