DataCard LM200 Guia do Utilizador descarregar pdf (Página 31)

SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 25

• Specify the number of retransfer panels used to print one side of a card. UV and

YMCK inks cannot be transferred in the same area on the same retransfer panel, so

this setting determines what data will print. The following table shows the result for

data outside the MAC address area and data overlapping the MAC address area.

The driver compares printing data for each type of ink to determine whether there are any

overlapping pixels. Priority is given to the “Print in 2 panels” setting.

Priority of Data

• The MAC address data is always printed using the UV panel. The area can knock

out other printing.

• Image files are processed in the order registered and shown in the File Information

area. Newer data will replace older data if it overlaps.

• Extracted text has higher priority than an image file and prints on top of any image.

• Page Split overrides extracted data and any image files.

Printing Data Setting for Number of Retransfer Film Panels to Use

1 Panel Auto 2 Panels

Printing data that

overlaps with the

UV ink data outside

the MAC address

printing area

None Print in 1 panel Print in 1 panel Print in 2 panels

YMC Ink Print in 1 panel

(The YMC ink is not

printed in areas

where it overlaps

with the UV ink.)

Print in 2 panels Print in 2 panels

K Ink Print in 1 panel

(The UV ink is not

printed in areas

where it overlaps

with the K ink.)

Print in 2 panels Print in 2 panels

Printing data inside

the MAC address

area

None Print in 1 panel Print in 2 panels

YMC Ink Print in 1 panel

(Does not print

using the YMCK

ink.)

Print in 2 panels Print in 2 panels

K Ink Print in 2 panels Print in 2 panels

UV Ink Prints the MAC address only

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 108 109

Comentários a estes Manuais

Sem comentários

DataCard LM200 Guia do Utilizador Página 31

Comentários a estes Manuais