DataCard LM200 Guia do Utilizador descarregar pdf (Página 71)

SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 65

Cleaning the thermal head

The thermal head assembly should be cleaned once every ten rolls of

retransfer film.

Begin with the printer (and optional laminator) powered off.

1 Open the printer door.

2 Press the ink ribbon cartridge eject button

and remove the ink ribbon cartridge.

3 Press the retransfer film cartridge eject button

and remove the retransfer film cartridge.

4 Wipe the thermal head with a large cotton

swab dipped in ethanol.

5 Reinstall the ink ribbon cartridge and the

retransfer film cartridge.

6 Close the printer door.

7 Power the printer on.

Cleaning printer fan filters

The printer has a fan filter to prevent airborne particles from entering the print

area. Clean the filters regularly. Replace them every year, or when the foam

begins to deteriorate.

1 Remove the external fan cover and filter.

2 Clean the filters carefully using a vacuum

cleaner. Hold the foam filter in place to prevent it

from being pulled into the vacuum.

3 Replace the fan filter and cover in the printer.

Tips – Thermal head

• Do not use metal or other

abrasive materials to

clean the thermal head.

• The thermal head can be

damaged by an

electrostatic charge.

Discharge yourself by

touching the printer

frame before cleaning

the thermal head.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 108 109

Sem comentários

DataCard LM200 Guia do Utilizador Página 71