
SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 57
Printer Security Number
The printer can have a security key (number) which can lock and unlock the printer using
the LCD panel. If a laminator is installed, this setting also locks the laminator.
Set Up
1 Press the middle key for at least three seconds. When you release, “Set Sec-Key
OK?” is displayed.
2 Press the Return key.
3 Enter the security number:
— The number can be up to 8 digits.
— The first digit entered is the left-most digit.
— You can move to the right only.
— For best results record the number as you enter it.
a Press the down-arrow to scroll to the value (0-9) for the left-most digit.
b Press the right-arrow to enter the next digit (00). The previous digit is replaced
by a • symbol.
c Continue steps a and b until you have entered the number you want.
4 Press the Return key. The display shows “Re-enter.”
5 Enter the number again, as in step 3.
6 Press the Return key.
— If the numbers match, the LCD panel shows Ready.
— If the numbers do not match, the LCD panel shows “Set Sec-Key OK”? Return
to step 2.
Tips for Success
• To change the security key number, delete the number and enter a new one.
Unlock the Printer
1 Press the middle key for at least three seconds. When you release, “Unlock Sec-
Key OK?” is displayed.
2 Press the Return key.
3 Enter the security number.
4 Press the Return key.
— If the numbers match, the LCD panel shows Ready and the printer door and
hopper can be opened.
— If the numbers do not match, the LCD panel shows “Unlock Sec-Key OK”?
Return to step 2.
Comentários a estes Manuais