DataCard LM200 Guia do Utilizador descarregar pdf (Página 79)

SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide 73

Transfer jam

If the card jams in the card feed rollers, “Jam (Transfer)” is displayed on the

LCD panel. To remove the jammed card:

1 Power off the printer.

2 Remove the card hopper and cards. See “Remove Hopper and

Cards” on page 9.

3 Locate the jammed card.

4 Place one Jog Dial on the

cleaning unit shaft and the

other Jog Dial on the card

feed rollers shaft.

5 Turn both shafts clockwise,

to move the card toward the

hopper area.

Do not force the card to

move. Instead, ask your

service provider for

assistance.

6 Remove the card from the

hopper area or the reject

card outlet.

7 If the printer has a turnover unit, make sure it is horizontal–in home

position. See “Turnover jam” on page 74.

8 Return the Jog Dial(s) to the home location, and close the printer

door.

9 Replace the card hopper. See “Replace the Hopper” on page 9.

10 Replace the ink ribbon or retransfer film cartridge if removed.

11 Power on the printer and initialize the supplies as described in

“Initialize the ink ribbon and retransfer film” on page 17.

Tips – Transfer jam

• Some internal parts may

be hot. Wear a glove

when reaching into the

printer.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 108 109

Sem comentários

DataCard LM200 Guia do Utilizador Página 79