DataCard LM200 Guia do Utilizador Página 50
- Página / 109
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
44 SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide
0104F000 The temperature of the retransfer
heating roller is too high.
Turn the power off and on again. If the same
problem recurs, turn off the power and contact your
service provider.
0104F100 The retransfer heating roller is faulty.
0104F200 The thermistor of the retransfer heating
roller is faulty.
0104F300 The temperature of the bend remedy
heating roller is too high.
0104F400 The bend remedy unit is faulty.
0104F500 The thermistor of the bend remedy
heating roller is faulty.
0104F600 The operating ambient temperature of
the printer is too low.
Check the temperature. If the same problem recurs
within the range of operating ambient temperature,
turn off the power and contact your service
provider.
0104F800 The temperature of the thermal head is
too high.
Turn the power off and on again. If the same
problem recurs, turn off the power and contact your
service provider.
0104**** A hardware error has occurred.
01051A00 Printer command is incorrect. Contact your service provider.
01052000
01052100 A security key has already been set. A
new security key cannot be specified.
—
01052200 Entry does not match the preset security
key.
—
01052300 Security key has not been specified. The
security lock function is not enabled.
—
01052400 Printer command is incorrect. Contact your service provider.
01052600
01052700 Ink ribbon specification is incorrect. Ensure that the printer driver’s ink setting matches
the installed ink ribbon.
01052A00 Printer command is incorrect. Contact your service provider.
01052B00 Magnetic encoding data is incorrect. Check the card specifications.
01052C00 IC encoder is not installed. —
01052D00 Magnetic encoder is not installed. —
01052E00 Optional devices are not installed. —
0105**** A command error has occurred. Contact your service provider.
010B****
Error Code Displayed Message Solution
- User Guide 1
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- 5 Messages 5
- Liability statement 6
- Introduction 7
- About the printer 8
- The inside of the printer 9
- The back of the printer 10
- About the laminator 11
- Using the printer 13
- Load Supplies 14
- Remove Hopper and Cards 15
- Replace the Hopper 15
- Adjust Card Thickness 15
- Load ink ribbon 16
- Load retransfer film 17
- Load top side laminate film 18
- Take-up Spool 19
- Supply Roll 19
- Guide Shaft 19
- Metal Guides 19
- Power on 20
- Optional laminator connection 21
- Power on the laminator 21
- Power on the printer 22
- Prepare to print cards 23
- Printing cards 23
- Print cards using ID software 24
- Print from a PC application 24
- Tips for Success 25
- Viewing and changing 27
- Printing Preferences 28
- Print tab 29
- Priority of Data 31
- 1 Panel Auto 2 Panels 31
- Page Split 32
- Security Erase 33
- Printing Area Settings 34
- Printer Settings 34
- Encode tab 35
- Laminate tab 35
- Configuration tab 35
- Printing Properties 36
- Status Monitor 37
- Close the Status Monitor 38
- Printer Status tab 39
- Printer Setting tab 40
- Retransfer tab 41
- Bend Remedy tab 42
- Media Setting tab 42
- Property tab 43
- Laminator tab 44
- Printer Select tab 45
- Others tab 46
- Security Lock tab 46
- Status monitor messages 47
- “Mending 49
- Using the LCD Menus 55
- Using the Printer LCD Panel 57
- Printer Security Number 63
- Red Status Light 64
- Blue Status Light 64
- Operator Button 64
- “Laminator 65
- LCD messages” on page 84 65
- Laminator Settings 66
- Taking care of your printer 67
- Cleaning the printer 68
- Tips – Cleaning card feed 69
- Cleaning the magnetic head 70
- Cleaning the thermal head 71
- Cleaning printer fan filters 71
- Cleaning the laminator 73
- Laminator fan filter 75
- Messages 77
- Printer error recovery 78
- Transfer jam 79
- Turnover jam 80
- Retransfer section jam 81
- Printer LCD messages 83
- “Operating environment” on 85
- “Load cards” on 85
- Take -up side 86
- Laminate pressure motor 86
- Supply side 86
- Supp ly Roll 87
- Patch Position 88
- Card warping 89
- Laminator LCD messages 90
- Supplies 93
- Ink ribbon 94
- Retransfer film 94
- Laminator material 95
- Cleaning supplies 96
- Site requirements 97
- Site guidelines 98
- Ventilation clearance 99
- Printer specifications 100
- Laminator specifications 101
- Magnetic Stripe Encoding 103
- Inline Encoding 104
- Character Code Table 105
- Compliance (FCC) 107
- Regulatory compliance 108
- 11111 Bren Road West 109
- Minnetonka, MN 55343-9015 109
- 952.933.1223 109
- 952.933.7971 FAX 109
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais